- 7 -
[ CONNECTING THE FOOT CONTROL ]
Push foot control plug into the machine socket and then into main socket.
Turn on the power switch. This power switch controls both the machine power and sewing light.
[ CONTROLLING SEWING SPEED ]
The foot control regulates the sewing speed.
The sewing speed can be adjusted by
increasing or decreasing the pressure on the
foot control.
[ SAFETY SWITCH ]
This machine is equipped with a micro safety
switch.
The machine is automatically cut off from the
motor electricity supply if front cover is open.
Close both free arm and front cover before
you start sewing.
Foot control
Safety switch
Foot control
Power switch
Machine plug
Power supply plug
Power supply
Machine socket
To Next Page
Loading...
Need help?
General
