SJCAM M10 - Replay Captured Content; SJCAM M10 Car Mode; Managing Recorded Files

Replay the acon
Car mode
Managing recorded content
There are several ways to review what you have captured, once you are done recording. You can
connect the camera to a computer to transfer or playback the captured content. Also you can use the
official mobile app ( available on Android and iOS ) to control your camera or playback the recorded
content. In the end, you can remove the microSD card and use a card reader to transfer or playback
the recorded content on it. The captured content is in industry standard .mov format for videos and
.jpg format for images, so it can be easily reviewed without using complex or expensive soware
applicaons.
Press the “Mode” buon unl you reach the Playback menu. Press the “Down” buon to advance
to the next video or photo. Press and hold the“Down”buon to scroll through several videos or photos
at once. A thumbnail of each video and photo will appear.Press the“Shuer/Select”buon for playback.
The blue arrow icon changes to red.Press the“Shuer/Select”buon again to pause the video playback.
A blue pause symbol replaces the red arrow. Press the “Mode” buon to stop playback. Press the “Up”
buon to go back to the previous video or photo.
While reviewing a video, pressing the “Down” buon once will fast-forward (FF) at 2X speed, twice
to speed up the playback at 4X, and if pressed once more, it will speed up the playback at 8X. Press the
“Up” buon during fast forward to decrease the speed of the playback by one step. Press the “Up”
buon once during playback to rewind at 2X speed, twice to rewind the playback at 4X, and if pressed
once more, it will rewind the playback at speed of 8X. Press the“Down”buon to reduce rewind speed
by one step.
While reviewing photos, press the “Down” buon to advance to the next photo.Press and hold the
“Down” buon to advance through several photos at once. Press the “Up” buon to go back to the
previous photo or video.
Refer to the TV-Out seng in the Setup Menu secon below, to review recorded content using
HDMI connecon.
When used in this mode, the camera becomes an onboard camera that connuously records the
view through a vehicle's windscreen.It may be aached to the interior windscreen or to the top of the
dashboard, by sucon cup or an adhesive-tape mount. Using the camera like this, may provide video
evidence in the event of an accident.
In order to use the M10 in “Car Mode”, press the “Mode” buon unl the “Setup” menu appears.
Then, enter the “Setup” menu and navigate to Page 7, select “Car Mode”, and then select “On”. Plug
the camera into a 12V adapter and plug the adapter into a 12V outlet in your vehicle. The camera can
work in “Car Mode” with or without a baery in the camera. When you start your vehicle, the camera
turns on and starts recording video automacally. When you shut off your vehicle it stops recording
and turns off automacally. You can also turn off the camera manually while recording. “Camera” and
“Playback” modes are disabled while recording in“Car Mode”and no seng can be changed.Aer the
camera shuts down completely, you can then turn it on manually and operate it normally, provided that
there is a baery in the camera.
In order to transfer your recorded content to a computer,connect the camera to computer using a
micro USB x USB cable. The camera will then turn on automacally and a dialog box on the camera
display will ask whether to use the camera as a“Mass Storage”device or a PC Camera. Highlight “Mass
Storage”and press the“Shuer/Select”buon.A blue screen with the words“Mass Storage”will appear
on the camera.