EasyManua.ls Logo

SJCAM M10 - SJCAM M10 Operating Modes; Action in Motion: Video Recording; Freeze the Action: Photo Capture

SJCAM M10
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
And Acon
Acon in moon
Freeze the acon
The SJCAM M10 comes with several various modes. To browse through the modes, press the Power
buon repeatedly, unl you find your desired mode. The default mode when you turn on the camera is
the “Video Recording” mode. Pressing the Power buon will guide you through the “ Photo shoong,
“Playback” and “Setup” modes. To select the mode, press the “Shuer/Select” buon.
The 12MegaPixel Pro-Grade CMOS Sensor, along with the 170 degree Wide Angle lens, 4x Digital
Zoom, Water Resistance of depths up to 30 meters, the Moon Detecon sensor and the “An-Shake”
Funcon will make sure you record every second of your adventure.
The camera can be operated without a baery if it is connected to an adapter. Note that the zoom
is electronic, not opcal. It operates by enlarging and cropping a recording or photo, not by adjusng
lenses. Make sure you've installed an adequately charged baery and a memory card with sufficient
remaining memory, before placing the camera in the waterproof housing.
The M10 lets you capture video in high resoluon 1080p at 30 fps (frames per second), by default.
Other available video resoluons include 1280x720 at 60fps, 1280x720 at 30fps and 640x480 at 60fps.
Use the “Sengs” menu to choose your video recording preferences.
With SJCAM M10, you will be able to produce a me lapse video, without using a separate, third
party device or soware. Use the “Sengs” menu to choose your me lapse preferences.
Video recording” mode is the default mode when you turn the camera on. It is indicated by the
camcorder symbol in the upper le corner of the status screen. In order to start recording, press the
“Shuer/Select” buon. To stop recording, press the “Shuer/Select” buon again. The camcorder
symbol on the status screen will disappear.
Pressing the Mode buon while recording,will protect a video from accidental deleon.A key icon
will appear on the display. Pressing and holding the “Up” buon, will zoom in up to 4x. Pressing and
holding the “Down” buon will to zoom out.
Aenon: If your memory card is out of available space,or the baery is depleted,the camera will
automacally stop recording.
With the M10 you will be able to capture high resoluon 12MP images with superb quality and vivid
colors. Turn on the camera and select the Photo Shoong mode. This mode is indicated by the camera
symbol in the upper le corner of the status screen. Using the “Shuer/Select” buon, you can choose
between “Single Shot”, “Self-Timer” and “Connuous (Burst)” shoong.
To capture images, press the “Shuer/ Select ” buon. If you are in the “ Single Shot ” mode, the
camera will capture one frame. If you are in “Self-Timer” mode, the camera will capture an image with
a delay of 3, 5 or 10 seconds, depending on your preferences. If you are in the “Connuous ( Burst )”
mode, press the “Shuer/Select” buon to capture consecuve images with a speed of 3, 5, 10 or 30
frames per second.This mode is great for capturing moving targets,like sport figures, animals,speeding
objects etc. Pressing and holding the “Up” buon, will zoom in up to 4x. Pressing and holding the
“Down” buon will to zoom out.
Aenon: If your memory card is out of available space, or the baery is depleted, the camera will
prompt you that you will not be able to capture any images.