SJCAM M10 - Setup Menu: Resolution & Recording; Setup Menu: Audio & Capture; Setup Menu: Image Quality & Color

Setup 1/9
Setup 2/9
Setup 3/9
Resoluon – It is the physical number of columns and rows of pixels that create the image and “fps”
is the frame rate i.e. “Frames per Second” – which is a number, showing how many images will be
displayed per second. Higher resoluons produce beer quality, but consume the baery faster.
Available opons include:
1080p (1920*1080)@ 30 fps
720p (1280*720) @ 30/60 fps
WVGA (848*480)@ 60 fps
VGA (640*480) @ 60 fps
Cyclic Record – A process of recording audio connuously to a storage medium. When the storage
capacity is full, the recording process connues to record at the beginning, overwring the previously
recorded material and replacing it with the new content.
HDR – High-dynamic-range imaging (HDR) is a technique used in imaging and photography to reproduce
a greater dynamic range of luminosity than what is achievable with standard digital imaging or
photographic techniques.
Moon Detecon – Moon detecon is the process of detecng a change in the posion of an object
relave to its surroundings or a change in the surroundings relave to an object. It can be used to trigger
the camera to start recording.
Audio – set up your audio preferences for video recording.
Date Stamp – Informaon that idenfies when a certain event occurred. When enabled, the date and
me will be shown on your recorded content.
Capture Mode - Single Shoot/ Self-mer - take pictures immediately with “ Single Shoot ”, or use “Self-mer”
to capture an image with a delay of 3, 5, 10 or 20 seconds.
Image Size – Choose the size of the photos. Available opons include:
12MP 4032×3024
10MP 3648×2736
8MP 3264×2448
5MP 2592×1944
3MP 2048×1536
2MP 1920x1080
1.3MP 1280×960
VGA 640×480
Quality – Adjust the quality of the images. Available opons include: “Fine”, “Medium” and “Standard”.
Sharpness – describes the clarity of detail in a photo, and can be a valuable creave tool for emphasizing
texture. Available opons include: “Strong”, “Normal” and “So”.
White Balance – or “WB” is the process of removing unrealisc color casts that affect the overall tone
of the image, so that objects which are actually white in reality, are rendered as white in your photo,
thus removing the color cast from a halogen lamp which makes everything in the photo a bit yellow,
for example. Available opons include: “Auto”, “Daylight”, “Cloudy”, “Tungsten” and “Fluorescent”.
Color – Manipulate the color of the image, which may help you to achieve a stronger impact on the
viewer. Available opons include: “Color”, “Black and White” and “Sepia”.