NOTICE: If the LED indicators on the arms of the aircraft: blue light (rear) + blue
light (front) keep slowly flashing means the GPS signal is weak; Please
keep pressing for 3 seconds to turn off the GPS mode: blue light
(rear) keeps flashing + white light (front) is solid on, aircraft enter into
the flight altitude mode, now the aircraft can take off.
14
NOTE: Starting the motors should be set before
the aircraft take off.
— Stopping Motors:
1. Pushing the joysticks into 5 & 7 o’clock
position again, motors stop working.
2. The motors will stop working if the motors
starting are not operated after 20 seconds.
All LEDs on the front arms and rear arms, you are ready to fly!
— Blue (rear) and Blue (front) lights are all solid (no blinking).
— App aircraft status: “Ready to fly”.
— Push the joysticks into 5 & 7 o’clock position.
— Motors automatically to start, push the left
joystick to take off the aircraft. (Starting the
motors before the aircraft taking off).
Step 10: Starting/Stopping motors
To Next Page
Loading...
