Waiting for GPS Signal D:00 H: 0.0 DS: 0.0 VS: 0.0
If the drone flies under NO GPS Mode, you can trim the drone to obtain more
balanced flight. Press for 3 seconds, and you will enter the trim mode.
Push the direction stick to the opposite side that the drone drifts to rebalance
the drone. For example, if the drone drifts to the left, push the direction stick
to the right to make the drone balanced. Press again to exit the Trim
Mode.
7. TRIM UNDER NO GPS MODE
- Connect the power of this model, and then access into “SETTING” in the
mobile phone, open the “WIFI” and find the “SJ-GPS PRO_XXXX”.
When the link is successfully connected, please exit the “Setting” option.
- Open “SJ-GPS PRO” software in the mobile to access into the control
interface.
QR code of “SJ-GPS PRO”
software for Apple IOS system
(Please scan this QR code to
install this software).
QR code of “SJ-GPS PRO”
software for Android system
(Please scan this QR code to
install this software).
DOWNLOAD THE SJ GPS PRO APP
1. APP INTRODUCTION
Wait until the Drone Status says “Ready to Fly” before initiating flight. This
will ensure that your GPS is synced and your drone is ready to fly.