SKF Machine Condition Advisor 9
User Manual
Battery Charge Status
When fully charged, the Machine Condition Advisor’s
battery provides approximately 10 hours of
continuous use. Battery charge status is indicated
using four vertical bars in the display’s lower right.
Each filled bar represents approximately 25% of
remaining battery life. It is recommended you fully
recharge the battery when only one bar remains (at
approximately 25% of remaining battery life).
¾ If temperature readings are not
required, the infrared temperature
sensor may be disabled to extend
battery life. Reference the following
How to Make Selections in Setup
Mode section for details.
75%
To Next Page
Loading...
Need help?
General
