16 SKF Machine Condition Advisor
User Manual
Turn the Instrument On
• Press either the Select or Browse button to turn
the instrument on.
¾ The instrument automatically turns
off after 2 minutes of inactivity, or
you may press and hold the Select
and Browse buttons simultaneously
to immediately turn off the
instrument.
The title screen briefly displays, then the
measurement screen displays in RUN mode.
In RUN mode, vibration measurements are
continuously repeated, and results update
continuously.
Place the Sensor Tip against the Machine
• Press the pen’s sensor tip against your
measurement POINT on the machine.
¾ For optimal sensor placement,
reference the Sensor Placement
Techniques section later in this
manual.
To Next Page
Loading...
Need help?
General
