from the date on which the installation of the On-Line System has been
audited and commissioned by SKF or its authorized service representative,
whichever period ends first.
Criteria 1.
Devices used with a Multilog Condition Monitoring Unit (CMU), Multilog
Local Monitoring Unit (LMU), including, but not limited to, the sensing
device, the interconnect cabling, junction boxes, if any, and the
communications interface, must consist only of SKF-supplied or SKF-
approved devices and/or components. The computer provided by Buyer
must meet the requirements stipulated by SKF.
Criteria 2.
SKF or its authorized service representative has installed the On-line
System or has audited the installation and commissioned the On-line
System.
“On-line Systems” are defined as systems consisting of Multilog Condition
Monitoring Unit(s) (CMU), Multilog Local Monitoring Unit(s) (LMU), and any
sensing or input devices, the interconnect cabling between the sensing or
input devices and the Multilog Condition Monitoring Unit(s) (CMU), Multilog
Local Monitoring Unit(s) (LMU), and the cabling between the Multilog
Condition Monitoring Unit (CMU), Multilog Local Monitoring Unit (LMU) and
the proprietary SKF communications interface with the host computer.
To Next Page
Loading...
Need help?
General
