EasyManua.ls Logo

SKF SFD - Safety Messages in Manual and in Warning Labels

SKF SFD
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY MESSAGES IN MANUAL AND IN WARNING LABELS
Safety messages appearing in the manual and on warning labels utilize signal words that translate to a
level of risk. Below are the definitions of the words used:
WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or
moderate injury.
REMINDER: Indicates suggestions for proper use.
Warning labels are attached to the air dryer. They look something like those below. Be sure that these
labels are visible and in place. If they become damaged or illegible, contact SKF for replacement labels
-WARNING-
BEFORE SERVICING SFD DRYER
UNIT(S) RELIEVE ALL AIR PRESSURE
FROM DRYER UNIT(S) AND AIR LINES
DO NOT OVER-TIGHTEN
CARTRIDGE
Lubricate threads, O-rings & flat
gasket with grease provided
before installing cartridge
Tighten cartridge ½ turn only after
gasket contacts casting surface
3