ACCESSORIES
Moisture Minder®
• #619775
• Automatically operates each time compressor cycles
• Requires no electricity
• Stainless steel reservoir
• Various mounting options included
• Seals made of Teflon® and Viton®
• Standard valve rated at 300psi
• Valves operate without pressure drop in air system
• Made in the U.S.A.
• Can use with synthetic oils
• Saves money
How it Works
When dryer regenerates, pilot signal is
relieved, piston returns to home position (5),
and check ball closes (6) preventing zero
pressure loss from system. Drain port (2)
opens draining condensate from external
reservoir
Pilot signal (1) causes piston to shift closing
off drain port (2). Piston (3) engages stainless
steel check ball (4) directing condensate up
into external reservoir.
Condensation enters Moisture
Minder® through inlet port (1)
48
To Next Page
Loading...