1. Overview
The Skip-Line SC-12 Road Marking Vehicle Control System is a comprehensive,
networked control system for road marking vehicles. In addition to controlling
road marking application and glass bead guns, the SC-12 can control most
aspects of the entire vehicle, including hydraulic and pneumatic pressures,
temperature controls, material application rates, lights, actuators, and more.
Some features covered in this manual may or may not have been included in
your system. See your system-specific documentation. If your system lacks a
feature in this manual and you would like to have it added, contact
Skip-Line to see if it is possible.
The SC-12 system is comprised of a network of core devices. At a minimum, the
devices required for this core system are:
Core Skipper
Front Hub and Rear Hub
At least one Master Control Box
Many optional devices are available also, and development on this system is
on-going with new features added frequently. Currently, the following optional
features are available:
Additional Master Control Boxes
Video Guidance & Overlay
Switch Panel Boxes
SC-12 Glass Cockpit
RPM Inputs
Pulse Counter Inputs
Proportional (Analog) Inputs
Proportional (Analog) Outputs
There are several items that require attention before the first use of the system.
Before connecting to road marking equipment, read all warnings in the
preface of this manual. Ensure the system will be installed in a manner
that will not expose it to parameters outside those described in the
specifications.
Before applying power for the first time, double check connections. Mis-wiring
can cause damage.
SC-12 Road Marking Control System - Installation and Operation Manual
10
To Next Page
Loading...
