2. Specifications
Please observe the following operational and storage specifications for each of
the basic SC-12 devices. Operation or storage outside of these specifications may
reduce the life of the device and, in some cases, void the warranty.
Each hub device internally fuses each port to 1A, so no individual fuses are
necessary. The hubs also clamp total current output (i.e., the sum of the current
drawn from all ports) at 10A. A 10A to 15A fuse is recommended in line before
the hub.
For optional SC-12 devices, see separate reference documentation.
SC-12 Road Marking Control System - Installation and Operation Manual
13
To Next Page
Loading...