Headrests
Introduction
Note
In sports seats, the headrests are integrated into the seat backrests and can-
not be adjusted in height.
Adjust height of front head restraint
Fig. 90
Setting the height of the front
headrest
›
To adjust the height, hold the locking button
A
and move the rest in the de-
sired direction » Fig. 90.
CAUTION
If the tablet holder adapter is secured to the guide rods of the headrests
» page 100, do not push the headrests down to the stop – risk of damaging the
headrests.
Adjusting the height of the rear headrests
Fig. 91 Setting the height of the rear headrest
›
Grasp the headrest and move upwards in the direction of
1
» Fig. 91.
›
To move the restraint down, hold the locking button
A
in the direction of
arrow
2
and push the rest in the direction of arrow
3
.
Removing/inserting the rear headrests
Fig. 92
Removing/inserting the rear headrest
›
To remove, pull the rest out of the seat backrest up to the stop.
›
Hold the locking button
A
in the direction of arrow
1
, at the same time us-
ing a flat screwdriver with a max. width of 5 mm to press the locking button
in the opening
B
in the direction of arrow
2
and pull out the rest in the di-
rection of arrow
3
» Fig. 92.
›
To insert, push the rest into the seat backrest in the direction of arrow
4
until the locking button clicks into place.
85
Seats and head restraints