Image with GPS coordinates
Fig. 231
Image with GPS coordinates
Infotainment enables guidance to the GPScoordinate data stored in the image.
›
Tap the
sensor field and then the function surface
Images
.
›
Select the connected source and open the image with GPS coordinates.
›
Tap on the function surface
» Fig. 231 in the image and a menu will open
with the option to start route guidance.
The image can be obtained from an external device in which GPS coordinates
were stored at the time of image creation. This can also be created and impor-
ted in the “MyDestination” application » Fig. 229 on page 185,
Map
Options for map display
Fig. 232
Map options
›
In the Navigation main menu, tap on the functional surface
.
The following function surfaces are displayed » Fig. 232.
2D - Two-dimensional map display
3D - Three-dimensional map display
Display of the route from the current vehicle location to the destination
Presentation of the destination position or the next interim destination in
the map (depending on the menu item setting ) →
Advanced settings
→
Sta-
tus line:
)
Automatic map display in day or night mode (depending on the currently
active vehicle lighting)
Daytime map display
Night-time map display
Switch the split screen display on/off » page 179
Switch the display of selected POI categories on/off » page 182, Entering
a destination via the map point
Switch the display of Google Earth
™
online map on/off » page 179
If the map scale of the 2D Map or 3D Map is greater than 10 km, then the map
is automatically displayed as 2D and aligned in the direction of north. If the
scale is increased beyond this value, then the map is switched back to the orig-
inal representation.
Map scale
Fig. 233
Function surfaces for
the map scale change:
Infotainment Columbus
A
B
C
D
E
F
187
Navigation
To Next Page
Loading...
