The SynScan Pro app can return the mount to the same home position. Start the Auto-
Home operation in SynScan Pro app's menu "Utility\Advanced\Auto Home"
* For equatorial mode: Fill the Dec Offset with 0, the mount will return to the polar-home
position.
* For alt-az mode: Fill the Dec offset with -90, the mount will return to the north-level position.
NOTIC:Avoid starting Auto-Home in the following position:Dec/Alt=-90°/270°.
4.3 Auto-Home
4.2 SynScan Hand Controller
SynScan hand controller is an optional controller for the Wave 100i mount. Please refer to
the SynScan hand controller manual for detail instructions.
4.1 SynScan pro APP
SynScan Pro app is the recommended controller for the Wave 100i mount.
Windows and Mac version: Download from www.skywatcher.com. Support USB, Wi-Fi,
Bluetooth connections.
Android version: Download from Google Play or www.skywatcher.com. Support USB, Wi-Fi
and Bluetooth connection. While using an USB connection with an Android device, a USB OTG
dongle is required.
iOS version: Download from App Store. Support Wi-Fi, Bluetooth connections.
The SynScan Pro app can also work with a gamepad on all platforms. Please refer to the
SynScan Pro app's inline help or instrctiotion manul for details.
Part IV:The WAVE100i Mount Features
Please visit www.skywatcher.com to check for the latest firmware for the Wave 100i mount.
The firmware can downloaded with the Motor Controller Firmware Loader application. Detail
instuction is included in the application package.
4.5 Firmware Update
12
The WAVE 100i has illuminated latitude scale and level bubble. The brightness can be adjusted
using the Polar Scope Illuminator settings in the SynScan Pro app or the SynScan hand hand
controller.
4.4 Illumination
To Next Page
Loading...
