35
Your Sky Hub has been manufactured to meet
international safety standards, but you must
take care if you want it to perform properly
and safely. It’s important that you read this
section completely, especially the ‘Warnings
and Cautions’ instructions. You should follow
the instructions set out in your Set Up Guide.
If you’ve any doubts about the Set Up process,
operation or safety of your Sky Hub, please
contact Sky.
Warnings and cautions
Remember that contact with 230V AC mains
can be lethal or can cause a severe electric
shock. To avoid this risk:
• Never remove the cover of your Sky Hub.
There are no user-serviceable parts inside,
but there are some high-voltage live parts
• Don’t attempt to repair your Sky Hub. Instead,
please contact Sky Customer Services
• If you move your Sky Hub between locations
at different temperatures, allow it to reach
room temperature before you connect it to
the mains supply
• Make sure that all electrical connections are
properly made
• Don’t connect your Sky Hub to the mains
supply until you have properly connected all
the other cables
• Disconnect your Sky Hub from the mains
supply before you disconnect any other
equipment from its rear panel
• Never push anything into holes, slots or other
openings in the casing of your Sky Hub
• Your Sky Hub is intended for use in moderate
climates. Don’t use or store your Sky Hub box
in hot, cold, damp or dusty places
• In order to ensure a free flow of air around
your Sky Hub, allow at least 10cm of space
above and on all sides. Don’t cover any
ventilation holes and slots
Using your
equipment safely
4
To Next Page
Loading...
