Mid Size & Full Size RT’s
Engine Powered February 2008
SKYJACK, Page 31
Visual and Daily Maintenance Inspections Section 2 - Operations
2.8-8 Platform Assembly
WARNING
Ensure that you maintain three points of
contact to mount/dismount platform.
1. Use the ladder of aerial platform to access
platform.
2. Close the gate.
Ensure there are no loose or missing
-
parts and there is no visible damage.
Ensure all fasteners are securely in -
place.
Ensure all railings are properly positioned -
and secured.
Ensure gate is in good working order. -
Lanyard Attachment Anchors•
Ensure attachment rings are secure and -
no visible damage.
AC Outlet on Platform•
Ensure outlet has no visible damage and -
free from dirt or obstructions.
Platform Control Console•
Ensure all switches and controller are
-
returned to neutral and are properly
secured.
Ensure there are no loose or missing -
parts and there is no visible damage.
Powered Extension Control Console •
(If Equipped)
Ensure all switches are returned to -
neutral and are properly secured.
Ensure there are no loose or missing -
parts and there is no visible damage.
WARNING
Ensure that you maintain three points of
contact to mount/dismount platform.
3. Use the ladder to dismount from platform.
Platform
Assembly
Platform Control
Console
Platform
Railing
To Next Page
Loading...
