Skyjack SJ12 Operating Manual

Section 2 - Familiarization Visual & Maintenance Inspection
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
FAMILIARIZATIONFAMILIARIZATION
2.3-6 Platform Assembly
WARNING
Ensure that you maintain three points
of contact to mount/dismount platform.
1. Open the gate (if equipped) and access the
platform.
2. Close the gate (if equipped).
- Ensure all railings are properly positioned
and secured.
- Ensure all fasteners are securely in place.
- Ensure gate (if equipped) is in good
working order.
- Ensure there are no loose or missing parts
and there is no visible damage.
- Ensure platform foot pedal is in good
working order and no loose or missing
parts and there is no visible damage.
• Fall Protection Anchorage(s)
- Ensure anchorage(s) are secure and there
is no visible damage.
• Platform Control Console
- Ensure all switches and controller are
returned to neutral and are properly
secured.
- Ensure there are no loose or missing parts
and there is no visible damage.
WARNING
Ensure that you maintain three points
of contact to mount/dismount platform.
3. Dismount from platform.
4. Close the gate (if equipped).
• Manuals
Ensure a copy of operating manual and
certificate are enclosed in manual storage box.
- Check to be sure manual storage box is
present and in good condition.
- Ensure manuals are legible and in good
condition.
- Always return manuals to the manual
storage box after use.
Fall Protection
Anchorage
Platform Control Console
Manuals Box
Platform Assembly
Vertical Mast
Page 19
TM

Skyjack SJ12 Specifications

General

Gradeability	25%
Drive Motor	24V DC
Machine Width	32 in (0.81 m)
Stowed Height	6.5 ft
Overall Width	32 in (0.81 m)
Stowed Height (Rails Folded)	6.5 ft
Drive Speed (Elevated)	0.5 mph (0.8 km/h)
Power Source	Electric