EasyManuals Logo

Skyjack SJ12 Operating Manual

Skyjack SJ12
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Function Tests Section 2 - Familiarization
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
FAMILIARIZATIONFAMILIARIZATION
FAMILIARIZATIONFAMILIARIZATION
Outdoor Option Flashing
Light (If Equipped)
Test All Motion Alarm (If Equipped)
WARNING
Be aware of overhead obstructions or
other possible hazards around the MEWP
when lifting.
1. Ensure path of intended motion is clear.
2. Activate any drive or lift functions.
Result: Alarm should sound.
3. Stop all platform motion.
Result: Alarm should stop.
NOTE
On MEWP with certain options, a flashing amber
light will accompany this alarm.
Test Outdoor Option Flashing Light (If
Equipped)
In no wind conditions (0 m/s), attempt the
following:
1. Raise the MEWP to 3.6 m (12 feet).
Result: Indicator light should flash.
2. Lower the MEWP below 3.6 m (12 feet).
Result: Indicator light should stop flashing.
WARNING
Do not operate the MEWP at a height
exceeding 3.6 m (12 feet) if wind
conditions exceed 0 m/s.
Flashing Light
(If Equipped)
Page 30
Vertical Mast
TM

Other manuals for Skyjack SJ12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skyjack SJ12 and is the answer not in the manual?

Skyjack SJ12 Specifications

General IconGeneral
Gradeability25%
Drive Motor24V DC
Machine Width32 in (0.81 m)
Stowed Height6.5 ft
Overall Width32 in (0.81 m)
Stowed Height (Rails Folded)6.5 ft
Drive Speed (Elevated)0.5 mph (0.8 km/h)
Power SourceElectric

Related product manuals