SkyLink ATOMS Series User Manual

Follow the installation instructions below based on the type of door you have.
Sectional Doors
1. Attach the straight door arm [J10] to the trolley [J3] using the clevis pin [F1],
secure with hitch pin [F2] .
2. Install the curved door arm [J11] inside the door bracket [J8] using the
clevis pin [E1], secure with hitch pin [E2].
3. Attach the curved and straight door arms together to the longest
possible length. Attach using bolts [F3] and nuts [F4].
One-Piece Doors
1. Bring the curved and straight door arms together to the longest
possible length. Attach using bolts [F3] and nuts [F4].
2. Attach the straight door arm to the door bracket using the clevis pin [E1],
secure with hitch pin [E2].
3. Attach the curved door arm to the trolley using the clevis pin [F1]., secure
with hitch pin [F2]..
1
2
3
1 2
3
J10
J11
E1
E2
F1
F2
J8
J3
J10
J11
E1
E2
F1
F2
J8
J3
F3X2
F4X2
F3X2
F4X2
Sectional Door
One-Piece Door
Step 6 – Attach door arm to trolley & door bracket
15
INSTALLATION

SkyLink ATOMS Series Specifications

General

Motor Type	DC
Horsepower	1/2 HP
Smartphone Control	Yes
Lighting	LED
Type	Garage Door Opener
Power Source	AC
Security	Rolling Code Technology
Operating Frequency	315 MHz
Compatibility	Most standard garage doors
Mounting Type	Ceiling Mount
Drive Type	Chain
Battery Backup	Yes
Safety Feature	Auto-reverse, Obstruction detection
Smart Features	IFTTT integration
Battery Type	12V
Number of Buttons	3
Operating Range	100 feet