Assembly & Operation Manual
TOOL LIST
1. Perma-Grit sanding blocks
2. Perma-Grit small files
3. X-Acto Razor Saw
4. X-Acto hobby knife
5. Carbide Cutters (5/pk)
6. Set of ball end hex wrenches
7. Dremel Drum Sander
8. Dremel cut-off discs and mandrel
9. Dremel tool
10. A good set of small Phillips and slot end screwdrivers
11. Steel ruler
12. Pin vise to hold 1/16” drill bit
13. Soldering Iron
14. Solder
15. Cable ties
16. ZAP CA, epoxy, Aeropoxy
17. Microballoons
18. Resin mix
19. Polyester putty
20. Aeropoxy
P-6
To Next Page
Loading...
