To Next PageTo Next Page
Need help?Do you have a question about the Skyrc e660 and is the answer not in the manual?
General| Brand | Skyrc |
|---|---|
| Model | e660 |
| Category | Battery Charger |
| Language | English |
Overview of the SkyRC e660 charger and initial recommendations for reading the manual.
A prominent warning about mishandling batteries and chargers, emphasizing danger of fire and explosion.
Features AUTO function for automatic feeding current control and malfunction detection for safety.
Allows storing up to 10 different charge/discharge profiles for quick recall and convenience.
Enables PC-based operation, real-time graphing, and firmware upgrades via USB.
Supports charging/discharging of LiPo, Lilon, LiFe, and LiHV batteries with specific modes.
Includes Re-peak, Delta-peak sensitivity, Cycle, and Auto Current Limit modes for NiMH/NiCd.
Features LiPo Voltage Meter and Battery Internal Resistance Meter for cell analysis.
Allows the charger to function as a DC power supply, converting AC to DC.
Covers unattended operation, environment, cord handling, surface placement, and avoiding shock.
Lists incompatible batteries like mixed types, pre-charged, non-rechargeable, or faulty batteries.
Emphasizes correct battery selection, current setup, voltage checks, and secure connections.
Details the purpose of discharging, setting voltage limits, and avoiding over-discharging.
Explains the function of STOP, BATT/PROG, -, +, and ENTER/START buttons for navigation and control.
Details how to initiate charging by long-pressing ENTER and stop by pressing BATT/PROG.
Describes connecting the charger to AC (100-240V) or DC (11-18V) power sources.
Guides on connecting the battery, emphasizing correct parameter setting and avoiding short circuits.
Illustrates the correct way to connect Lithium and NiMH/NiCd battery packs to the charger.
Guides on selecting LiPo battery type, modes, and setting parameters before charging.
Details the battery cell check process and confirming detected cell count for accuracy.
Explains how to monitor real-time charging status, capacity, and individual cell voltages.
Shows how to view end voltage, input voltage, and temperatures during the charging process.
Details settings for Safety Time and Capacity Cut-Off to prevent overcharging.
Guides on selecting NiMH/NiCd type and Charge mode, with a critical warning about LiPo usage.
Explains how to set the charge current, advising to follow battery manufacturer recommendations.
Describes automatic detection of battery parameters and safe charging with upper current limit.
Guides on setting the auto charge current, suggesting 1C rate for safety.
Explains selecting Discharge mode, setting discharge rate, and voltage cut-off.
Details the Re-Peak mode for confirming full charge and battery acceptance of fast charge.
Explains the easy cycling process (discharge/recharge) to improve battery performance.
Details charging Pb batteries, emphasizing 1/10th capacity current and no fast charging.
Explains selecting Discharge mode, setting discharge rate, and voltage for Pb batteries.
Lists additional information available during Pb battery charging/discharging.
Guides charging and storage for DJI Mavic smart batteries.
Guides on using the e660 as a power supply, adjusting output power (10-60W) and voltage (13.8V).
Details setting and recalling up to 10 charge/discharge profiles for different batteries.
Allows adjustment of temperature, safety, timing, power, and general system configurations.
Guides on connecting the battery to check total, highest, lowest, and individual cell voltages.
Guides on connecting the battery to check total, highest, lowest, and individual cell resistances.
Lists common error messages like polarity, connection breaks, cell errors, and temperature issues.
Explains PC control software for monitoring, initiating, and controlling charging processes.
Lists the items included in the charger package.
Suggests optional accessories to enhance charger functionality.
Details the technical specifications of the e660 charger, including voltage, current, and dimensions.
States compliance with CE directives and FCC Part 15 Subpart B standards.
Defines key terms related to battery charging and discharging, like voltage, current, and capacity.
Disclaims liability for damages arising from misuse or non-adherence to manual instructions.
Outlines the product warranty period, conditions, and service procedures.
