To Next PageTo Next PageWhat to do if Skywell 5 Water Dispenser is not dispensing water?
If your Skywell Water Dispenser isn't dispensing water, there are a couple of things to check. First, make sure the unit is properly plugged in and turned on. Second, check the water level in the upper right-hand corner of the screen to ensure that the water levels are adequate.
How to fix cold water that is not getting cold in Skywell 5 Water Dispenser?
If the cold water from your Skywell Water Dispenser isn't getting cold, consider the following: 1. Ensure the water tank is at least 25% full by checking the level on the display. 2. Verify the unit has had at least 90 minutes to cool the water. 3. Check the cold temperature settings. 4. See if the condenser coils (black tubing at the back) are radiating heat, as a potential compressor cooling system problem may exist.
General| Brand | Skywell |
|---|---|
| Model | 5 |
| Category | Water Dispenser |
| Language | English |
Details on proper grounding and outlet requirements to prevent electrical hazards.
Instructions on how to dispense cold water using the touch screen interface.
Procedure for dispensing hot water, including safety warnings for hot temperatures.
Feature to monitor daily water intake and progress.
Option to set up a personalized user profile for tracking.
Setting to operate the unit silently for a specified duration.
Access to various operational and customization options.
Configure timed periods for water production throughout the day.
Adjust the desired temperature for hot and cold water dispensing.
Select visual representations for user profiles within the app.
Set daily water intake targets, measured in cups.
Establish a personal identification number for profile security.
Record water consumption data into the user's hydration profile.
Daily cleaning procedure for the dispensing nozzle to ensure hygiene.
Quarterly cleaning of the water collection tank for optimal performance.
Routine cleaning of the external surfaces using stainless steel cleaners.
Procedure for cleaning the air filter to maintain water quality.
Specific cleaning steps required after extended power interruptions.
Identifying unusual odors or operational issues with the unit.
Troubleshooting steps when the water fails to reach the desired cold temperature.
Information regarding compliance with FCC RF exposure limits.
