Skyworks Si5338 - Revision History

Si5338-RM
162 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
Rev. 1.4 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 2021
REVISION HISTORY
Revision 1.4
April, 2020
 Updated to use “ClockBuilder Pro” instead of “ClockBuilder Desktop”.
 Updated "10.4. Register Categories" on page 42.
Changed “PAGEBIT” to “PAGE_SEL”.
 Corrected typos throughout.
Revision 1.3
August, 2014
 Fixed typos in Up Parameters in "8.1. Down Spread" on page 19.
Revision 1.2
January, 2013
 Updated "8.2. Center Spread" on page 20 and added “8.2.1. Center Spread Equations for Rev A Devices”.
 Updated descriptions on Registers 0, 52, 63, 74, and 85.
 Updated section 10.6.1. Example Part Number for Device ID Registers to include Rev B information.
Revision 1.1
August, 2012
 Updated "10. Si5338 Registers" on page 28.
Added information on Multisynth Reset (MS_RESET) register bit.
Revision 1.0
March, 2012
 Changed document type from application note (AN411) to reference manual (Si5338-RM Reference Manual).
 Added information on registers 2–5.
 Corrected register 47 read-modify-write mask to allow writes to bits 7:6.
 Corrected reset value of register 289 from 0x00 to 0x01.
 Corrected reset value of register 292 from 0x30 to 0x90.
Revision 0.6
 Updated "3.2. Calculating MultiSynth Values" on page 8.
Added information about Register 51[7:4].
 Updated Equation 1 on page 9.
“Note:...to 1” was changed to be a more accurate statement.
 Updated Figure 9 on page 15.
Reg50[7:6] changed from 0 to 1.
 Updated "6. Configuring the Frequency Increment/Decrement" on page 16.
Added reference to register locations of Finc/Fdec.
 Updated "7.2. Phase Step Size" on page 17.
Added reference to registers for Pinc/Pdec.
 Updated "9.3. Output Driver Trim" on page 23.
Specified register42[7:5] = 001b.
Added 1.8 V LVDS to Driver type and trim table.
 Updated "10.2. Miscellaneous Register Writes" on page 28.
Changed register 47[5:2] = 0101b to Register 47[7:2] = 000101b.
Removed Register 241 = 0x65 as this is already detailed in the 5338 data sheet Figure 9.