SMA 10000TL - 13 Contact; Required Contact Information; Country-Specific Contact Details

Troubleshooting SMA Solar Technology AG
70 SMC9-11TLRP-IEN100640 Installation Guide
MSD-dI Internal measurement comparison fault or hardware defect.
Corrective measures
• If this fault occurs often, contact the SMA Serviceline.
MSD-Fac Internal measurement comparison fault or hardware defect.
Corrective measures
• If this fault occurs often, contact the SMA Serviceline.
MSD-Vac Internal measurement comparison fault or hardware defect.
Corrective measures
• If this fault occurs often, contact the SMA Serviceline.
MSD-Timeout Internal measurement comparison fault or hardware defect.
Corrective measures
• If this fault occurs often, contact the SMA Serviceline.
offset Fault in the acquisition of measurement data.
Corrective measures
• If this fault occurs often, contact the SMA Serviceline.
PowerBalance The Sunny Mini Central is part of a three-phase system with two further
Sunny Mini Centrals. This is equipped with the SMA Power Balancer for
preventing asymmetric loads. The operating parameter "PowerBalancer"
is set to "PhaseGuard" or "FaultGuard".
Corrective measures
• For more detailed descriptions of the operation modes
"PhaseGuard" and "FaultGuard", please refer to section
5.6”Connection of the SMA Power Balancer” (page39).
REL_INV_CLOSE
REL_GRID_CLOSE
A grid relay does not close. The inverter checks the relays connecting it
to the grid before feeding power into the grid. If the grid relays do not
function properly, the inverter does not connect to the grid for safety
reasons.
Corrective measures
• Contact the SMA Serviceline.
Message Description and corrective measure