SMA America, LLC Commissioning
User Manual BeamBT-eng-BUS110712 31
22. Move the selection frame to the button ">>" by turning the button.
☑ The button becomes dark.
23. Press the button.
☑ The page for searching for systems appears.
Determining free NetID
In order to check which NetID is still available, you need to
perform a search for systems with the Sunny Beam at the
installation location of every single device of your Bluetooth PV
system, as described in the following.
24. Place the Sunny Beam near a device of your Bluetooth PV system.
25. If the "Start detection" button has not become dark, turn
the operating button.
☑ The button becomes dark.
To Next Page
Loading...