SMA SUNNY BEAM - Display Settings; Changing the Contrast; Changing the Display Switch-Off

SMA America, LLC Operation
User Manual BeamBT-eng-BUS110712 55
7.8 Display Settings
7.8.1 Changing the Contrast
1. Select "Settings > Display options > Contrast".
2. Select "Upper contrast" or "Lower contrast".
3. Set the contrast.
☑ The contrast is changed.
7.8.2 Changing the Display Switch-Off
To save energy the Sunny Beam will automatically switch off its display after being idle for 1 minute.
You can adjust the duration or set the display to always remain switched on (Setting "-").
1. Select "Settings > Display options > Display off after:".
2. Set the interval.
☑ The switch-off has been set up.
Power consumption
The longer the display remains switched on, the higher the power consumption of the
Sunny Beam.