SMA America, LLC Operation
User Manual BeamBT-eng-BUS110712 75
7.13.3 Changing the Date Format
Abbreviations: D= day, M= month, Y= year
1. Select "Settings > Country settings > Formats".
2. Select "Date format" and change the setting.
☑ The date format has been changed.
7.13.4 Changing the Timestamp Format
Possible settings: 12h or 24h (e.g. 6:00 pm or 18:00)
1. Select "Settings > Country settings > Formats".
2. Select "Timestamp format" and change the setting.
☑ The timestamp format has been changed.
7.13.5 Activating/Deactivating Daylight Saving Time
1. Select "Settings > Date & time".
2. Set or remove a checkmark in the box for "Daylight saving time". When there is a checkmark in
the box, daylight saving time is activated. The time settings on the Sunny Beam and on the
inverters will switch to daylight saving time.
☑ Daylight saving time is activated/deactivated.
7.13.6 Changing the Time Zone
1. Select "Settings > Date & time".
2. Select "Time zone" and change the setting.
☑ The time zone is changed.
To Next Page
Loading...