SMA SUNNY BEAM - Page 88

Troubleshooting SMA America, LLC
88 BeamBT-eng-BUS110712 User Manual
Connection to the
computer
The computer displays
a message that the USB
device could perform
better.
The message does not influence
the functionality or speed of the
Sunny Beam transmission.
• You can switch the message off,
but then other USB error messages
will not be displayed.
Proceed as follows. These steps
are for Windows XP and may be
different in other operating
systems:
– Right-click on "My Computer"
and select "Device Manager."
– Open the "USB Controller" in
the Device Manager.
– Right-click on the item
"Host Controller".
– Select "Properties".
– Select "Advanced".
– Tick the box that says "Do not
display USB errors".
Problem Cause Rectification