Why is my SMA SUNNY BOY 3600TL Inverter waiting for DC start conditions (Event 3901 to 3902)?
If your SMA Inverter displays 'Waiting for DC start conditions' (Event 3901 to 3902), the input power or voltage of the PV modules is not yet sufficient for feeding into the electricity grid. Wait until irradiation is higher. If this event recurs at medium irradiation levels, check the PV plant design and the correct circuitry of the PV array.
How to fix external fan fault (Event 7508) on SMA Inverter?
If your SMA Inverter shows an external fan fault (Event 7508), the fan is either clogged or defective. Clean the fan or replace it.
What to do if my SMA SUNNY BOY 3600TL says SD card defective (Event 7101)?
If your SMA Inverter says the SD card is defective (Event 7101), the SD card is not formatted correctly or is defective. Re-format the SD card and re-save the files to the SD card.
How to fix parameter file not found error (Event 7102) on SMA SUNNY BOY 3600TL Inverter?
If your SMA Inverter reports that the parameter file was not found or is defective (Event 7102), copy the parameter file into the SD card drive :\PARASET directory.
What to do if my SMA SUNNY BOY 3600TL says update file defect (Event 7106)?
If your SMA Inverter indicates that the update file is defective (Event 7106), re-format the SD card and re-save the files to the SD card.
How to resolve no update file found error (Event 7110) on SMA SUNNY BOY 3600TL?
If your SMA Inverter reports that no update file was found (Event 7110), copy the update file into the SD card drive :\UPDATE directory.
What does PE conn. missing (Event 901) mean on SMA SUNNY BOY 3600TL?
If your SMA Inverter indicates 'PE conn. missing' (Event 901), the PE connection is missing. Check AC installation.
How to fix L/N swapped error (Event 1001) on SMA SUNNY BOY 3600TL Inverter?
If your SMA Inverter shows 'L / N swapped' (Event 1001), L and N have been connected the wrong way round. Eliminate connection error.
What causes installation fault (Event 1101) on SMA Inverter?
If your SMA Inverter displays 'Installation fault' (Event 1101), a second phase is connected to N. Correct the connection.
What does it mean if my SMA SUNNY BOY 3600TL Inverter reports varistor defective (Event 7401)?
If your SMA Inverter indicates that the varistor is defective (Event 7401), at least 1 of the thermally monitored varistors is defective. Check varistors.
General| Rated Output Power | 3600 W |
|---|---|
| Max. input voltage | 600 V |
| Number of MPP Trackers | 1 |
| Max. apparent AC power | 3600 VA |
| Nominal AC voltage | 230 V |
| Protection Class | IP65 |
| Operating Temperature Range | -25 °C to +60 °C |
| AC Voltage Range | 184 V - 276 V |
| Frequency Range | 50 Hz / 60 Hz |
| Cooling | Convection |
To Next Page
