Why did parameter setting fail (Event 7105) on my SMA SUNNY BOY 3600TL Inverter?
If your SMA Inverter reports that parameter setting failed (Event 7105), it is not possible to set parameters via the SD card. Check the parameters for valid values and ensure change rights via SMA Grid Guard code.
What to do if my SMA SUNNY BOY 3600TL says Inst. code invalid (Event 9002)?
If your SMA Inverter displays 'Inst. code invalid' (Event 9002), the SMA Grid Guard code entered (personal installer password) is not valid. Enter a valid SMA Grid Guard code.
How to unlock grid parameters (Event 9003) on SMA SUNNY BOY 3600TL Inverter?
If your SMA Inverter indicates that the grid parameter is locked (Event 9003), the current country data set is locked. Enter a valid SMA Grid Guard code for changing the country data set.
Why is changing grid parameters not possible (Event 9005) on my SMA SUNNY BOY 3600TL?
If your SMA Inverter indicates that changing grid parameters is not possible (Event 9005), the selected rotary switch setting for the language settings is not programmed. Check setting of the rotary switches, enter the SMA Grid Guard code, and ensure that sufficient DC voltage is available.
What does system disturbance (Event 601) mean on SMA SUNNY BOY 3600TL?
If your SMA Inverter is showing a system disturbance (Event 601), the internal monitoring function of the inverter has detected an excessively high proportion of direct current in the grid current. Check the grid connection for direct current. If this event occurs often, check with the network operator whether it is possible to raise the threshold for monitoring.
General| Rated Output Power | 3600 W |
|---|---|
| Max. input voltage | 600 V |
| Number of MPP Trackers | 1 |
| Max. apparent AC power | 3600 VA |
| Nominal AC voltage | 230 V |
| Protection Class | IP65 |
| Operating Temperature Range | -25 °C to +60 °C |
| AC Voltage Range | 184 V - 276 V |
| Frequency Range | 50 Hz / 60 Hz |
| Cooling | Convection |
To Next Page
