SMA America, LLC 4 Assembly
Technical description SI4548_6048-US-TB_en-13 33
5. Attach the Sunny Island to the wall mounting
bracket.
6. Screw the Sunny Island to the wall mounting
bracket on both sides using the screws (M6x10)
provided. Tighten the screws clockwise.
7. Ensure that the device is securely in place.
8. Close the recessed grips with the ventilation grids
provided. To help you identify the sides, the
ventilation grids are marked on the inside with
"links/left" and "rechts/right".
☑ The Sunny Island is mounted using the wall mounting bracket.
To Next Page
Loading...
