Why does SMA SUNNY ISLAND 6048-US Inverter slave switch to standby with error F117?
If the slave switches to standby shortly after startup with error message F117 on your SMA Inverter, check if the line conductors within the cluster, or from the cluster to the Multicluster Box, are connected incorrectly.
What does 'MMC operation failed' mean on SMA SUNNY ISLAND 6048-US Inverter display?
If "MMC operation failed" appears on the display of your SMA Inverter, inspect the card using your PC or laptop. If necessary, replace it with a new SD card.
What to do if QCG does not run on SMA SUNNY ISLAND 6048-US Inverter?
If the QCG does not run on your SMA Inverter, switch off the Sunny Island and then restart it.
Why are there high outputs transferred back and forth between clusters in SMA SUNNY ISLAND 6048-US?
If high outputs are being transferred back and forth between clusters in the cluster network of your SMA Inverter, the nominal frequencies and voltages may be defined differently.
Why generator/grid not reconnecting on SMA SUNNY ISLAND 6048-US Inverter even if limits not exceeded?
The SMA Inverter Sunny Island connects with a hysteresis, meaning the connection value is slightly below or above the disconnection value.
General| Model | SMA SUNNY ISLAND 6048-US |
|---|---|
| Rated Power | 6000 W |
| AC Output Power | 6000 W |
| Maximum AC Output Power | 6000 W |
| AC Voltage | 120/240 V |
| Nominal AC Voltage | 120/240 V |
| AC Frequency | 60 Hz |
| DC Voltage | 48 V |
| Maximum DC Current | 125 A |
| Maximum Input DC Voltage | 64 V |
| Max. Efficiency | 96% |
| Maximum AC Power | 6000 W |
| Input Voltage Range | 40 V - 64 V |
| Battery Voltage Range | 40-64 V DC |
| Communication | Ethernet |
| Operating Temperature Range | -13°F to 131°F (-25°C to 55°C) |
To Next Page
