SMA SUNNY ISLAND 8.0H - Page 31

SMA Solar Technology AG 4 Operating the Off-Grid Inverter with Sunny Remote Control
Operating Manual SI80H-BE-BEN120810 31
5. When you have set the required parameter, press the button. This saves the setting.
6. To exit the setting page, switch to the display page or the standard mode:
• Turn the button to the left until the return icon appears in the first line.
• To return to the display page, turn the button to the left until <back> appears.
• To switch to standard mode, turn the button to the left until <home> appears.
•Press the button.
Hint: <back> and <home> also appear at the end of the list if the button is turned to the right.
Example: Setting the repetition type to Weekly in time-controlled mode
• Access the Inverter (1/2) action page.
☑The action page Inverter (1/2)
appears.
• Turn the button until the return icon appears next to the parameter Repetition.
The Sunny Remote Control then changes from action page Inverter (1/2) to action
page Inverter (2/2).
• Press the button.
• Turn the button to the right until Weekly appears.
• Press the button. This saves the parameter.
☑ The repetition type is set to Weekly in
time-controlled mode.