5 Mounting
SMA Solar Technology AG
Operating manual STP50-40-BE-en-15 29
1000 (39.37)
1000 (39.37)1000 (39.37)1000 (39.37)
900 (35.43)900 (35.43)900 (35.43)
1000 (39.37)1000 (39.37)1000 (39.37)
300300
(11.81)(11.81)
300
(11.81)
Figure 8: Recommended clearances(Dimensions in mm)
5.2 Mounting the Inverter
CAUTION
Risk of injury due to the weight of the inverter
Injuries may result if the inverter is lifted incorrectly or dropped while being transported or when
mounting it to the wall mounting bracket.
• Carry and lift the inverter upright with the help of several people. In doing so, keep in mind
the weight of the inverter and take hold of the carrying handles on the inverter. Always take
hold of the two carrying handles mounted both on each side.
• Transport the product using the carrying handles or hoist. Take the weight of the product
into account.
• Do not use the carrying handles as attachment points for hoist equipment (e.g. straps, ropes,
chains). Insert eye bolts into threads provided on top of the product to attach the hoist
system.
• Use all carrying handles provided during transport with carrying handles.
• Take into account the center of gravity of the inverter. The center of gravity is on the side of
the AC-Connection Unit.
Additionally required material (not included in the scope of delivery):
☐ For transport with a hoist: 4 eye bolts (M8)
To Next Page
Loading...
