22
EFE 2500A /AF - 4000A/AS/AN
11. OPERATING PROCEDURE
1. Always wash your hands with soap and potable water before assembling the machine.
(Preferably use new paper towels to dry your hands)
2. Only use the removable parts after they have been washed sanitized and air-dried.
3. Fit the beater assembly only when machine is off.
4. Follow all the instructions of this manual and the operating procedures of the store
owner, and at all times follow recognized in-store hygiene procedures, in particular those
in respect of dairy products.
5. Repairs must be done by the persons who are authorized by Smach
®
, if not, any
product failure warrantee will become invalid and void.
12. PREPARATION AND START UP PROCEDURE
12.1 PREPARATION
Make sure that all the removable parts have been washed with potable
water and sanitized, and then air dried before they are used.
Attention: NEVER ASSEMBLE OR DISASSEMBLE ANYTHING
UNLESS YOU HAVE:
1. Selected the STOP Mode.
2. Switched off the power at the wall and un-plugged the power cable.
To Next Page
Loading...