Smach EFE 2500A - Sanitizing Procedure

29
EFE 2500A /AF - 4000A/AS/AN
13.3 SANITIZING PROCEDURE
After cleaning procedure, hopper, barrel and all the removable parts must
be sanitized. It is recommended to use approved “SMACH
®
Sanitizer”
during disinfection. (Please contact SMACH
®
to provide approved
“SMACH
®
Sanitizer”.)
The SMACH
®
sanitizer is based on alcohol and QAC.
It is suitable for metals against corrosion.
It provides a fast and effective disinfection.
It is a volatile material, so it leaves no residue on the applied surface.
- Keep out of reach of children.
- Rinse well after application.
- Avoid eye contact. In case of contact, wash with water immediately.
- Avoid skin contact.
- Do not use for face, body, hand and food cleaning.
- Keep in a cool place.
- Do not expose to direct sunlight.
Directions to Use
It is a ready to use solution. Apply through spraying and wiping. It is recommended to wait
at least 5 minutes after spraying.
The sanitizing solution mustn’t be mixed with water.
During cleaning and sanitizing, follow all instructions given in this User
Guide, otherwise, Smach
®
Gıda Makine A.Ş will not take any responsibility
of unwanted results.