8
EFE 2500A /AF - 4000A/AS/AN
Do NOT allow untrained personnel to operate the Soft-Serve
Freezer.
Do NOT insert or remove the beater from the freezing barrel while
the Machine is connected to the power supply. First isolate the power
supply.
Do NOT remove the hopper cover (lid) unless you are filling or re-
filling the hopper with the mix.
Do NOT switch ON the Machine at the wall socket switch when the
following has not yet been done: (a) the beater is inserted properly
(b) the barrel head is fitted correctly and the four nuts screwed on
correctly and tightly, and (c) the barrel is flooded with Mix.
When removing, replacing or cleaning the removable parts do so with
caution because the beater blades have sharp edges that can easily
cause injury.
WINTER STORAGE
If the place of business is to be closed and the machine won’t run during
the winter months, it’s important to protect the freezer.
Disconnect the freezer from the main power source to prevent possible
electrical damage.
For WATER-COOLED freezers, disconnect the water supply. Use the air
pressure on the outlet side to blow out any water remaining in the condenser. This is
extremely important. Failure to follow this procedure may cause severe and costly damage
to the refrigeration system.
NOTICE: Smach
®
Gıda Makine A.Ş will not take any responsibility if the users do not follow
all the instructions as described in this User Guide.
To Next Page
Loading...
