Smappee Infinity - Tools (not included); Supplies (not included)

Smappee Infinity – Installation manual – English
10
Tools (not included)
Multimeter.
Screwdrivers.
Wire stripper.
Flashlight.
Needle-nose pliers.
Wire cutter.
Optional: drill, drill bits and screws.
Supplies
(not included)
Cable ties.
Single or three-phase circuit breaker (fuse for Smappee Power Box only).
Ethernet cable in the case of wired communication.
External Smappee Wi-Fi antenna in the case of low Wi-Fi signal.
3G/4G Dongle in case of cellular communication.
Single phase or 3-phase breaker when installing an Output module in combination with a
breaker.
Solid cable with diameter range 0.5 to 1.5 mm² (20 AWG – 15 AWG) when installing an Input
and/or Output module.