Smappee Infinity - Planning and site preparation

Smappee Infinity – Installation manual – English
8
3. How to install
The installation procedure consists of the following steps:
• Planning and site preparation: to determine the complete monitoring solution.
• Initial setup and configuration: the creation of a location, its properties, and the loads to be
measured.
• Physical installation: the physical installation of all the Infinity components.
• Smappee cloud connection: the selection of internet connectivity and configuration.
• Configuration of CTs
• Validation of the installation: checking the accuracy of live power values.
Optional steps:
• Configuration of Smappee Input module: the configuration of the pulse input sensors.
• Configuration of Smappee Output module: the configuration of the relay outputs.
This procedure is done with the Smappee Energy Monitor mobile app.
1
2
3
4
5
6
7
8