Smappee Infinity - Addendum 1 - Colour code explanation; Genius Status Codes; Connect Series Status Codes; Power Box Status Codes

Smappee Infinity – Installation manual – English
34
14. Addendum 1 – Colour code explanation
Genius
Green pulsing
All good. The Genius is working correctly.
Green continuous
Network connection is successful, but the Genius is not yet
activated on a location.
Ethernet: Connected to the local network.
Wi-Fi: Connected to the Wi-Fi and the local network (i.e. the Wi-Fi
password is correct)
3G/4G Dongle: Connected to the 3G/4G network.
Blue continuous
The Genius is starting up. This may take up to 5 minutes. The light may
briefly go off during that time. If this takes more than 10 minutes, please
contact support.
Blue flashing
The Genius is ready to be connected to the local Wi-Fi network.
Red continuous
The Genius has no connection to the internet during start-up.
Connection issue.
Red flashing
The Genius had a working internet connection but has lost its
connection to the Smappee cloud.
Yellow
The Wi-Fi hotspot access point has been activated to allow the
Genius to reconfigure the Wi-Fi settings.
Connect series
Green pulsing
All good. The Connect is working correctly.
Green continuous
The Connect is connecting to the internet and must become Green
pulsing. If this takes more than 2 minutes, please contact support.
Blue continuous
The Connect is starting up. If this takes more than 30 seconds, please
contact support.
Blue flashing
The Connect is ready to be connected to the network.
Red continuous
The Connect has no connection to the internet during start-up.
Connection issue.
Power Box
Status LED is pulsing once every 3 seconds.
Power Box is powered on and operating correctly.
Status LED is pulsing once every 1 second.
Smappee Bus B error.