The meter counts down 5 seconds and your result appears on the
display after a beep. The test result will automatically be stored in the
meter memory. Please do not touch the test strip during the
countdown as this may result in an error.
5.
After the testing is completed, the measurement data will be
transmitted.
6.
Discarding the Used Test Strip
Removing the Used Lancet
Note: If the blood sample does not ll the check window, do not add a
second drop. Discard the test strip and start over with a new test strip.
You can eject and discard the used test strip by using the strip ejector.
Unscrew the lancing device cover. Place the safety tab of the lancet on a
hard surface and carefully insert the lancet needle into the safety tab.
Dispose of the used test strips as a potential medical waste.and in
accordance to your state guidelines.
Potential Biohazard
13
To Next Page
