Smart Meter iGlucose Essential - Maintenance and Troubleshooting; Charging the Battery

NOTE：
Using the Micro USB cable or AC adapter charges the battery in about
3 hours.
When using the USB port on your computer to charge the battery, be
sure the computer is turned on and not in standby mode. If the meter
does not charge, try using another USB port on your computer.
To optimize battery life, it is best to charge the battery when the Empty
Battery Symbol ( ) appears.
22
Proper maintenance is recommended.
When the meter needs to be charged, the Empty Battery Symbol ( )
will appear.
When the Empty Battery Symbol ( ) and ‘E11’ appear on the screen,
the meter cannot be used. You must charge the battery before using
your meter.
Charging the Battery
Caution:
The meter battery may be charged using one of the following options:
Micro USB cable (computer charging)
Micro USB cable with the AC adapter (wall charging)
If you need the AC adapter which is not included in your kit, please
contact your local distributor.
Do Not charge the meter outdoors or in a wet area.
Do Not use the Micro USB cable, AC adapter or meter if it is damaged,
discolored, abnormally hot, or has an unusual odour. Contact your local
distributor.
Do Not plug the AC adapter into a wall socket and leave it unattended.
Verify that the wall socket voltage matches the AC adapter voltage.
Do Not allow unsupervised children to charge the meter battery.
SECTION 4: MAINTENANCE AND
TROUBLESHOOTING
Caution:
Do Not insert a test strip when the meter is connected to a computer or
wall outlet for charging since the meter is designed that blood glucose
testing is not allowed during meter charging.
Caution:
Contact seller to conrm whether the AC adapter meets following
specications before purchasing it:
-Input: 100-240V~, 50/60Hz, 0.2A Max;
-Output: 5.0V , 1.0A;
-Standard ANSI/AAMI ES 60601-1 or IEC 60601-1.