10
Resetting Your CMU
To Reset The CMU:
Press the reset button on the front of the CMU
To Reset The CMU
Using Reset Button:
Press and release center of button to reset your CMU from a
remote location
To Reset The CMU Using A
Caregiver Pager With Reset
Button:
Press and release Reset Button located on the front of the
pager
Reset Button
*MUST BE PROGRAMMED TO THE CMU
6
• When you have programmed all of your components, put the CMU into the LOCK
position using the switch on the right side of the monitor.
• Press and release the RESET button on the front of the CMU and then test your
components.
Final
Step
To Next Page
Loading...