33 | CHAPTER 4 – USING AND MAINTAINING YOUR SMART BOARD INTERACTIVE
WHITEBOARD
Keeping the Writing Surface Clean
IMPORTANT
• Before you clean your interactive whiteboard, turn off or disconnect your
computer so that you don’t scramble the desktop icons or inadvertently
activate applications when you wipe the screen.
• To view dirt or streaks more easily, set your projector to standby
(lamp off) mode.
With proper care, your SMART Board interactive whiteboard will provide years of
trouble-free service. Follow these tips to keep the screen surface clean:
• Don’t use dry-erase markers, which can be very difficult to remove.
• If dry-erase ink is used, erase it as soon as possible after use. The longer
dry-erase ink stays on your interactive whiteboard’s surface, the more difficult it is
to remove.
• If erasing doesn't completely remove dry-erase ink marks, clean the writing
surface with a household glass cleaner, such as Windex, daily, weekly or
as required.
• Remove excess dry-erase dust with a damp cloth before using a cleaner.
• Use dry-erase marker cleaner, such as Expo dry-erase cleaner, if you can still see
marks after using a household glass cleaner.
• Don’t spray cleaner directly onto the screen’s surface. Instead, spray a light
amount of cleaner on a cloth and then gently wipe the screen.
• Don’t allow excess glass or whiteboard cleaner to flow into the crack between the
lower frame and the writing surface, or into the pen tray slots.
• Use isopropyl alcohol for stubborn stains and ghosting.
TIP
For information on disinfecting your interactive whiteboard, see Disinfecting Your
SMART Board Interactive Whiteboard (smarttech.com/kb/133351
).
To Next Page
Loading...
Need help?
General
