APPENDIX B
CALIBRATING YOUR INTERACTIVE FLAT PANEL WITH MACOSX
32 smarttech.com/kb/170534
3. Tap the cross. After a few seconds the following screen appears. In some cases, you may
have to tap twice.
4. Tap each cross as they appear once.
IMPORTANT
If there are multiple monitors, the orient screen will automatically move to the next monitor.
If this other monitor is NOT an E70 touch screen press ESC or click Cancel with the mouse. If
you accidentally touch the board while the screen is on this monitor, then you will have to
repeat the above procedure.
To Next Page
Loading...
