SMART E70 - Appendix B: Calibrating Your Interactive Flat Panel with Mac os; Calibrating Your SMART Board E70

Appendix B
31 smarttech.com/kb/170534
Appendix B: Calibrating your interactive flat
panel with MacOSX
You need to calibrate the SMARTBoard E70 interactive flat panel after you install the software or if
you change the display resolution.
Calibrating your SMARTBoard E70
Before you calibrate your SMART E70 interactive flat panel, ensure that you have installed the
required drivers. See smarttech.com/E70Software for product drivers and software.
To calibrate your SMARTBoard E70
1. Select the Orientation from system tray or SMARTSettings
2.
The following screen is displayed on your first monitor.
If you have multiple monitors, press Esc on your keyboard until the page is visible on your E70
touch interface.