e.g. hammers, away from the pedal-crank
bearing.
Generator mode (recuperation)
Your smart ebike is equipped with a so-
called regenerative brake. This technol-
ogy allows you to convert kinetic energy
into electrical energy. When you apply the
brakes, the electric motor acts as a gener-
ator (generator mode). Electrical energy
generated in this way is returned to the
battery. At the same time, the energy recu-
peration process brakes your ebike without
wear on the brakes.
Serial number
You will find the serial number of your
ebike on the right-hand side of the frame,
near the pedal-crank bearing. Write down
the serial number and keep it in a safe
place.
12
>> Introduction.
To Next Page
Loading...