Maintenance
Regular work
smart recommends that you have the ebike serviced once a year at a qualified specialist
workshop.
Before each journey Action
R
Check tyres and wheels
R
Check the drive belt
R
Check the battery lock
R
Inspect the functioning of the brake system
R
Inspect the brake system for wear
R
Check bolt and screw connections
Inspection before starting a
journey (Y page 18)
Every 300 - 500 km (186 - 310 miles) Action
R
Check the drive belt for wear and correct tension/
routing
R
Remove dirt from the drive belt and belt pulleys
R
Check that all bolt and screw connections are
fastened securely
R
Measure the brake disc wear
Drive belt tension (Y page 61)
Brake disc wear (Y page 48)
Every 3000 km (1864 miles) Action
Check the following components and replace, if
necessary:
R
headset
R
wheel hubs
R
pedals
R
drive belt
R
gear cable
By a qualified specialist work-
shop
Once a year Action
R
Check torques of all screw and bolt connections.
R
Check gearshift, headset and brake settings
R
Check the drive belt for correct tension and wear
R
Check tyres and wheels
R
Check wear on parts subject to high stress
By a qualified specialist work-
shop
Maintenance and care
47
>> Operation.
Z
To Next Page
Loading...